This technology has been tested successfully by:

Elite Electronic Engineering Inc.

Type Of Test: Electro Magnetic Compatibility Test

Test Results: Compliant

Elite Electronic Engineering Inc.

Type Of Test: RF Emissions Measurments (required by the FCC)

Test Results: Compliant

Ohio State University

Type Of Test: To determine wheather currents generated by the module were in fact distributed over the entire surface of an automobile.

Test Results: Detection confirmed on all areas of the vehicle.

CC Technologies

Type Of Test: To examine the efficacy of the module over a surface in the absence of an electrolyte film between the point of application of the electrical signal from the module and the area being protected.

Test Results: As noted the experiment was repeated on three seperate occasions with broadly consistent results. In all three tests the corrosion rate was reduced by over 90%.

Underwriters Laboratories

Type Of Test: Salt Spray Test (performed to ASTM D - 1654 - 92 standards)

Test Results: Scribe marks on all protected panels showed no corrosion.